EMS Electrical carry out EICR Testing Reading and surrounding areas – The purpose of an EICR sometimes known as Electrical Periodic or Fixed Wire Testing is to see if the electrical systems and installations are safe and well maintained. We will provide you, the owner, with a certificate of safety following the inspection. For any installations that are deemed unsatisfactory, a report will be issued detailing where the issues are, what the likely cause of the issue is, and how it can be fixed in order to pass the test fully. All issues will be graded in order of importance and severity.
A full EICR test will provide valuable insight into the functioning of the electrical infrastructure at your place of work or property. It will allow you to not only assess the condition that the electrical systems are in but also to evaluate how efficiently they are working. If available, details of how you could upgrade the systems that may have suffered from deterioration will be detailed for you and you will be advised how to proceed with replacing them. Improving the lighting and energy consumption for your premises can both save you money in the long run and also make your business more environmentally friendly.
Issues that can be revealed & then fixed with an EICR test.
Finally, insurance companies are increasingly asking for Electrical Installation Conditioning reports being done to avoid, avoidable offences and accidents within the workplace.
EMS electrical are experts in emergency lighting and EICR testing in Reading, We cover all emergency lighting installation and testing -throughout the area. We also carry out all electrical fixed wire EICR testing.
Emergency Lighting Test Reading Info
Emergency lighting is the safety ‘back-up’ lighting which comes on if there’s a power cut to the mains electricity supply which would otherwise plunge a building into darkness.
It has to be properly designed, installed, maintained, and tested by qualified electricians such as EMS Electrical in order to meet regulations.
At the EICR Testing division of EMS Electrical, our expert engineers take the worry out of the whole process for you by ensuring that your systems are up to date, up to standard, well maintained and above all, provide the required level of safety for your employees and customers in the event of an emergency.
Categories of Emergency Lighting
You can be broken down into three different categories:
Emergency escape lighting: When people need to leave a building in an emergency and the power has gone out, such as in the event of a fire, emergency lighting covers all escape routes. The aim is safely guiding people to their nearest exit via lit escape routes.
Emergency safety lighting: This applies when power has failed, but it’s not an emergency situation. Emergency safety lighting is enough for people to remain in areas of a building while power is restored, but it’s not enough to carry on working.
Standby lighting: This is back-up lighting that is activated during a power cut to a level that allows work to continue. This has to be 100% of the normal lighting.
Who needs emergency lighting?
For safety reasons most commercial properties, including workplaces, retail, leisure, and public buildings (and some domestic properties) need some form of emergency lighting and there are different requirements relating to different categories of building.
Risk assessments are usually necessary to determine what level of emergency lighting system is needed.
Rules and regulations regarding Emergency Lighting?
Rules and regulations around emergency lighting have toughened up in recent years and the legal obligations for installing adequate systems now carry the same importance as fire alarm systems.
Relative legislation includes the Regulatory Reform (Fire Safety Order), the Health and Safety at Work Act, Building Regulations and the EU Workplace Directive.
Emergency lighting regulation is covered by a variety of British Standards at each stage of the process, including general advice about the provision of emergency lighting (BS 5266-1:2016), the specified illumination (BS EN 1838: 2013), minimum requirements for the provision and testing of emergency lighting for different premises and various product standards (BE EN 50172:2004/BS 5265:2004).
Emergency lighting testing
All emergency lighting needs to be regularly tested by qualified electricians in accordance with safety standards. This is to ensure it is working correctly, compatible with fire safety systems, and continues to meet regulations – for example, if you’ve redesigned or refurbished your premises, the chances are your emergency lighting systems will need to be altered accordingly.
Various tests are required daily, monthly, and annually, including checks of individual luminaires and exit signs and of central battery systems.
Get in touch now for more information on emergency lighting Testing in Birmingham and Midlands, or to request a quote for emergency lighting testing for your business.
As well as a 24 hour call out service covering Reading and surrounding areas, our local electrician services are varied and include the following:
We offer all domestic and commercial electrical services from changing a plug, fitting new sockets, or replacing light fittings to full house rewires, EICR’s and commercial services including the following:
As one of the most respected electrician Birmingham, we have many happy customers, most of whom come from recommendations and word of mouth. We are proud to support homeowners and businesses throughout the West Midlands.